Connect//business networks · Iași

Business networks and Wi-Fi, designed, installed and documented.

We build the network your company runs on: the cabling back to the rack, the switches, the firewall and the Wi-Fi. Each department gets its own network, guests never reach the file server, and at handover you receive the network diagram and the equipment list. If you already have a network, we start with an audit.

  • VLAN · VPN
  • surveyed Wi-Fi
  • Cat6/6A · fibre

01 — Network

A data network built from scratch

When you move into a new office, or when the old network has grown without any plan, we start over. First we work out who needs what: accounting, the warehouse, the tills, the printers, visitors. That gives us the VLAN layout and the firewall rules. Only then do we install the gateway, switches and access points, which we configure and monitor from the same console. Companies with more than one site get a VPN between them, so the ERP and shared files look the same from every office.

  • Gateway and firewall, with rules for each network
  • Managed PoE switches for access points and IP phones
  • Separate VLANs for staff, guests, printers and IoT
  • Site-to-site VPN and remote access for staff
  • Dual internet lines where the company cannot afford to go offline
  • Documentation at handover: network diagram, addressing, equipment list

02 — Wi-Fi

Professional Wi-Fi

Dead zones don't go away with a stronger router. We come on site, measure the signal and interference, then mark on the floor plan how many access points are needed and where they go. We set up roaming on a single SSID, so a laptop or a scanner moves from one access point to the next without dropping the connection. Guests get a separate network that sees nothing of the company network.

  • Offices: lots of laptops, video calls and network printers
  • Hotels and guesthouses: signal in every room, a separate guest network
  • Restaurants: tills and tablets on their own network, customers on theirs
  • Warehouses and production halls: coverage between racks and roaming for scanners
  • On-site survey before installation
  • Managed and monitored from the same console as the rest of the network
Guide: Wi-Fi in warehouses and production halls

03 — Infrastructure

Structured cabling

The cables in your walls stay there long after you have replaced the switches twice, so they are worth pulling once and doing well. We run Cat6 or Cat6A from every data outlet back to the rack, and use fibre for long runs or links between buildings. In the rack, every cable lands on a patch panel, labelled at both ends, and every run is tested before handover. Electrical work (circuits, distribution board, power sockets) is carried out by the ANRE-authorised electricians we work with.

  • Cat6 or Cat6A cable for data and PoE
  • Fibre for long runs and links between buildings
  • Rack installed and organised: patch panel, switches, UPS for the network gear
  • Labels at the outlet and on the patch panel
  • Every run tested, with the results handed over
  • Outlet and cable route plan in the final documentation

04 — Audit

Audit of an existing network

The network works, but nobody knows exactly how any more. Whoever set it up no longer works with you, the router password is on a sticky note on the rack, and the Wi-Fi drops in the meeting room. In an audit we check everything that is there, from the cables to the firewall rules. You get a report of what we found and a remediation plan in order of priority: what is worth keeping, what has to be redone and where to start. The report is useful even if you decide to work with someone else.

  • Cabling and rack: routes, labels, dead outlets
  • Equipment: age, firmware, whether it still gets updates
  • Configuration: VLANs, firewall, remote access
  • Wi-Fi coverage, measured on site
  • Security: default passwords, exposed ports, flat networks
  • Report of findings and a prioritised remediation plan

05Equipment

One network, managed from one place

Gateway, switches and Wi-Fi are configured and monitored from the same console, so you can always see what is connected and what isn't working. Network projects are led by specialists holding the Ubiquiti UFSP and UWA certifications. We are not tied to a single manufacturer, though: if a project calls for a different platform, we choose the right one.

Ubiquiti

UniFi partner. Ubiquiti UFSP and UWA certifications.

NATCERT ISO 27001 certification mark
Certification · NATCERT

We are ISO/IEC 27001 certified

CONTROL DEVELOPMENT SRL has an information security management system certified to ISO/IEC 27001:2022 (SR EN ISO/IEC 27001:2023) by the certification body NATCERT.

Certified scope

  • Information security consulting and NIS2 compliance.
  • Administration, monitoring and support of clients' IT and network infrastructure.
  • Custom software development and API integrations.
  • Integration of building automation systems.

06FAQ

What companies ask us

How long does it take to install a network in a small office?

Mostly it comes down to the cabling. If the data outlets are already there and in good shape, mounting the equipment and configuring it goes quickly. If new cable has to be pulled, the time depends on the number of outlets, the routes and how easy it is to get into the ceilings and walls. After the site visit we give you a concrete timeline and agree on when we work, so your team is disturbed as little as possible.

Can we keep the equipment we already have?

Yes, if it is in good condition and still receives firmware updates. During the audit we look at every device and tell you what stays in place, what can be reused elsewhere and what needs replacing. Cabling that was done properly is usually kept, because it outlives the switches and routers.

What happens after handover?

You get the network documentation: the diagram, the addressing, the equipment list and the configurations. The network stays yours. If you want, we keep monitoring it and take care of maintenance, remotely or on site. For the rest of your IT, from servers to Microsoft 365, we also offer IT management.

Do you only work with UniFi equipment?

No. We are a UniFi partner and use the platform often, but we choose equipment to fit the project. Where it suits better, we also work with other platforms, TP-Link Omada for example.

Do you work outside Iași?

Yes. We are based in Iași and work on site in Iași and the surrounding counties of the Moldova region. Configuration audits and maintenance can largely be done remotely, but cabling, installation and Wi-Fi measurements are done on site.

Tell us what your office looks like

How many rooms and floors, how many people use the network and what isn't working now. Within 24 hours we come back with a proposed solution and a cost estimate, with no obligation.